DUDLEY Kinetic Infrared Urinal Flush Controntrol, Grey, 327878

Kinetic by Thomas Dudley has been designed to optimise the water management of automatic cisterns and multiple-station urinal installations. 1 Kinetic flush control kit is required for each urinal cistern.

Comes as a complete urinal flush control kit. The urinal sensor is connected to a solenoid that is plumbed directly into a water feed pipe. The sensor detects movement within the vicinity of the urinals and subsequently allows a small amount of water to fill the urinal cistern.

Kinetic - Infrared Urinal Flush Control - Grey Controller & Grey Valve - Mains and Battery Operated, 0.1 to 10 Bar Pressure c/w Ceiling Fitting Kit, Tap Compression 1/2" Adaptors, Remote Solenoid Connector


For all washroom urinals

Introducing Kinetic - the new, intelligent urinal flushing control from Dudley. Attractively styled, multi-functional and simple to install and set-up, Kinetic has been designed to reduce water consumption in commercial washroom installations.

USES
• Kinetic is ideal for use with automatic cisterns and multiple station urinals.

FEATURES
• Can be easily installed into pipework, wall or ceiling mounted applications.
• Supplied with an aesthetically pleasing flush mounting kit.
• Each unit can be powered by mains, 4 x AA batteries or mains with battery backup (batteries not included).
• Control box can be installed remotely from the solenoid and is supplied as standard with a 1m cable.
• Passive infrared sensor detects user movement. After a pre-set time, the solenoid valve allows water to fill the cistern and deliver a flush.
• Fast fill reduces scale build up.
• Suitable for water pressures ranging from 0.1 bar to 10 bar.
• Quick and simple set up via user-friendly buttons and intuitive software without having to continually refill and empty the automatic cistern.
• 12 hour hygiene and 24 hour economy flushing modes can also be quickly configured to customer requirements.
• Tamper proof design and chrome fittings are conveniently included.
• WRAS approval pending.
• Control box dimensions: 118mm(h) x 118mm(w) x 33mm(d).
• Solenoid box dimensions: 98mm(h) x 100mm(w) x 50mm(d).

WATER-SAVING
• Regulates flushing based on actual washroom usage to save up to 80% of water when compared to traditional systems.

OPTIONS
• Available in glossy white and grey finishes. White control box and grey solenoid combination also available.

Kinetic Specifications
Control Box Dimensions
118(h) x 118(w) x 33(d)
Control Box Weight With Batteries
363g
Control Box Weight Without Batteries
268g
Solenoid Dimensions
98(h) x 100(w) x 50(d)
Solenoid Weight
303g
Electrical Supply
230V AC mains or 4x AA Battery
Solenoid Cable
1M cable included, up to 5M can be used
Control Box Fixing
Flush Mounting Bezel Provided, can fit a standard single pattress (not provided)
Solenoid Fixing
Tap to compression adaptors provided
Control Box Material
-
Solenoid Material
WRAS approved acetal
Control Box Sensor Type
Passive infra-red
Finish
White & Grey
Fill Times
Up to 2 minutes (9L Cistern at 0.1bar)
Operating Pressure
0.1 - 10 bar