POLYPIPE Manufacturer's Part Number: PB3822.
POLYPIPE PolyPlumb Tank Connector complete with E.P.D.M. Sealing Washer, 22mm x 3/4" BSP, PolyPlumb Push-Fit Socket x Male Thread; Cold water applications only.
PolyPlumb is an integrated flexible plumbing system, incorporating Polybutylene pipes and a complimentary range of push-fit fittings, and can be used in hot and cold water supply, and radiator and floor heating installations. PolyPlumb - the original Polypipe push-fit plumbing system - offers a high degree of reliability, achived through a product design that has been tried and tested over the past 30 years.
Product features:
- High performance stainless steel grab ring ensures superb joint integrity.
- Demountable only by dis-assembling: Reduces potential for tampering.
- One step operation: For quick and easy installation.
- Suitable for use in cold water systems ONLY.
- Complete with E.P.D.M. sealing washer (tighten by hand).
- Material: Polybutylene.
- Colour: Grey.
- Please note: All PolyPlumb fittings are supplied with pre-lubricated EPDM 'O' rings. If for any reason further lubrication is required only Polypipe silicone lubricant should be used (purchased separately). Substances such as solder flux must not be used.
- Caution: Do NOT insert fingers into the PolyPlumb fittings, as the grab ring is sharp and designed to grip.
- Guarantee: Polypipe guarantees for 25 years against defects in materials or manufacture of the PolyPlumb hot and cold water supply and heating systems from the date purchased. This guarantee only applies if the products are installed in accordance with the manufacturers recommendations and are used in a normal domestic operation.
POLYPIPE PolyPlumb 22mm x 3/4" Tank Connector, Grey, PB3822
MPN: PB3822
£3.40 Inc VAT
£2.83 Exc VAT
£8.12 RRP 58% Saving
In stock - 6 available
Available for Next Day Delivery
if order placed before 3:00pm
Description
Read more
Description
POLYPIPE Manufacturer's Part Number: PB3822.
POLYPIPE PolyPlumb Tank Connector complete with E.P.D.M. Sealing Washer, 22mm x 3/4" BSP, PolyPlumb Push-Fit Socket x Male Thread; Cold water applications only.
PolyPlumb is an integrated flexible plumbing system, incorporating Polybutylene pipes and a complimentary range of push-fit fittings, and can be used in hot and cold water supply, and radiator and floor heating installations. PolyPlumb - the original Polypipe push-fit plumbing system - offers a high degree of reliability, achived through a product design that has been tried and tested over the past 30 years.
Product features:
- High performance stainless steel grab ring ensures superb joint integrity.
- Demountable only by dis-assembling: Reduces potential for tampering.
- One step operation: For quick and easy installation.
- Suitable for use in cold water systems ONLY.
- Complete with E.P.D.M. sealing washer (tighten by hand).
- Material: Polybutylene.
- Colour: Grey.
- Please note: All PolyPlumb fittings are supplied with pre-lubricated EPDM 'O' rings. If for any reason further lubrication is required only Polypipe silicone lubricant should be used (purchased separately). Substances such as solder flux must not be used.
- Caution: Do NOT insert fingers into the PolyPlumb fittings, as the grab ring is sharp and designed to grip.
- Guarantee: Polypipe guarantees for 25 years against defects in materials or manufacture of the PolyPlumb hot and cold water supply and heating systems from the date purchased. This guarantee only applies if the products are installed in accordance with the manufacturers recommendations and are used in a normal domestic operation.
Read more
