Honeywell BK-G Diaphragm Gas Meter,BK-G40/U65, DN65 PN16

Honeywell range of Diaphragm Gas Meters scale from the everyday domestic BK-G4 Gas Meter that you would find in most households, right up to the BKG100 Meter that the Utility Companies use on incoming supplies to large buildings. These Meters are MID approved giving them the ability to be used on Billing applications and also have extraordinary flow performance down to the smallest amount of gas.



The smaller BK-G Meters from 20 - 50mm all use a union connection, which are supplied alongside each Meter. from 65mm to 100mm a PN16 Flanged connection is supplied. All of the Diaphragm Meters are connected through the U shape design with inlets on top of the Meter.



Each BK-G Gas Meter has a mechanical index for the meter reading itself but they can also be paired up with an IN-Z61 Pulse Transmitter in order to send data remotely. Higher specification of communication can also be offered with M-Bus outputs and also Digital readouts for easier Meter reading. There is also a model that offers temperature compensation for the highest accuracy of monitoring.



The standard use for this range is to monitor Natural Gas supplies but these meters can also be used with LPG gas systems as well. The maximum operating pressure of gas that can be monitored is 500mbar.

Pulse Value - 10:1m3
Qmin m3/hr - 0.4
Qmax m3/hr - 65

Compliance - MID Approved

Connection Size - 20-100mm

Connection Type - Flanged Connection, Screwed Connection

Communication Outputs - Pulsed, M-Bus